Connect the male end of the AC adapter into the circular power port at the bottom of your printer.Make sure you AC cable is not connected to a power supply (unplug if it is).iOS device installed with the latest Lightspeed Restaurant POS appĬonnect the receipt printer to a power supply.Router (we recommend routers set up in close proximity to your hardware and printers).Ethernet LAN cable (long enough to reach your router).To set up your receipt printer, you'll need the following equipment: Add the printer to Lightspeed Restaurant.Connect the printer to your network (for older printer models only).However, unlike thermal printers, the paper and ink with the U220 are highly resistant to grease and heat in the kitchen.įollow the steps below when setting up your Epson TM-U220 LAN kitchen printer: Compared to thermal-type receipt printers, the U220 is louder and takes longer to print. This printer uses replaceable ribbon cartridges and prints on standard 3-inch wide plain paper rolls. The Epson TM-U220 printer is a dot-matrix impact printer. Users can then print bar or kitchen tickets to the TM-U220 from an iOS device through a shared network connection. The Epson TM-U220 LAN impact kitchen printer connects directly to an internet router with an ethernet cable.
